KEO 53512 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 82 Degree Point Angle, Round Shank, 5/16" Shank Diameter, 1/2" Body Diameter
Highlighted Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of
- Round shanks allow use with a wide variety of toolholding
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce
- 82 degree angle
Features
Information
- Best Choice - #1 Best Countersink Bit For Metal
- Checked on 13/08/2024
- Based on 94 Reviews
IRWIN Tools Black Oxide Countersink Drill Bit, 5-Piece Set (1877791)
Highlighted Features
- Made from industrial grade High-Speed Steel for increased durability. Black oxide finish adds corrosion
- Five-flute design reduces vibration for smoother drilling and extended bit
- Precision-ground 82-degree tip drills countersink holes into most machinable metals, as well as wood and
- 1/4-inch round shank fits all handheld and stationary
Features
Information
- Best Choice - #2 Best Countersink Bit For Metal
- Checked on 13/08/2024
- Based on 73 Reviews
Countersink Drill Bit Set, 5 Pieces 1/4” 3/8” 1/2” 5/8” 3/4” High Speed Steel 1/4” (6mm) Round Shank, 82 Degrees Counter Angle, 5 Flute Mill Cutter Bit Countersink Set, Silver
Highlighted Features
- VERSATILITY – Ideal counter sink tool for the tool box, including 5 most popular sizes: 1/4, 3/8, 1/2, 5/8, 3/4inch counter sink drill
- PRECISION – These Countersink Drill Bits are beautifully machined to achieve exact countersink holes fit for 82-degree flat heads screws; allows the screw heads to be flush and even with
- SHARP- Five-flute design reduces vibration and removes chip better and eliminates the need for fussing with depth, provides smoother drilling experience and extended bit
- COMPATIBILITY – 6mm round shank fits all handheld and stationary drills; work with most machinable metals, plywood, softwood, hardwood, fiberglass plastic, mild steel. Don't work on
- DURABILITY - Made from High-Speed Steel with oxide finish for corrosion resistance; including a padded storage Case to protect the bits from
Features
Information
- Best Choice - #3 Best Countersink Bit For Metal
- Checked on 13/08/2024
- Based on 100 Reviews
JNBPRO COUNTERSINK DRILL BIT SET FOR METAL - 5 PC HIGH SPEED STEEL WITH 5% COBALT HSS-Co M35 GRADE, SIZES 1/4", 3/8", 1/2", 5/8" & 3/4" - 5 FLUTES w/ 82 DEGREE - 1/4" ROUND SHANK - METAL COUNTERSINK BIT SET
Highlighted Features
- METAL BIT COMPOSITION - Esclusively designed to work with industrial grade metals they are manufactured with High Speed Steel with 5% Cobalt known as HSS-Co M35
- EFFICIENCY - Working with stationary drill ensures better finish on chamfers but they can be used with hand drills as well for countersinking in any hard or soft metal and
- DURABILITY - This metal counter sink bit set for steel is made for last longer than any other regular High Speed Steel bits, they are extremely sharp and finished with
- DESIGN - Designed with 82 degree 5 flutes to reduce vibration and smoother drillling , the 1/4" round shank fits all stationary and hand
- IMPORTANTE TIPS FOR USE - The Metal Countersink Bits are just a chamfer tool to countersink the holes, it is not self drill tool, the pre drill with a metal
Features
Information
- Best Choice - #4 Best Countersink Bit For Metal
- Checked on 13/08/2024
- Based on 56 Reviews
wesleydrill Countersink Drill Bit Set 5 pcs 82 Degree Counter Sink Fit for Sink Holes into Most Machinable Metals, Plywood, Softwood, Hardwood, Fiberglass Plastic, Mild Steel
Highlighted Features
- [Specifications and packaging]: Countersink drill bit set includes 5 pcs countersink bits and 1 pc aluminum carrying case.Include size:1/4", 3/8", 1/2", 5/8", and
- [Function]: Counter sink drill bits sink holes into most machinable metals, plywood, softwood, hardwood, fiberglass plastic, mild
- [Material]: Metal countersink bits are made from industrial grade high-speed steel for increased durability.Each sink has a black oxide coating to resist
- [Advantage]: 82 degree countersink a five-flute design removes chips faster and dills smoother and ensures an extended
- [Special 82-Degree Tip Drills]: Steel countersink bits 82-degree tip drills can drill holes on almost any material, with unique design, high efficiency, convenience and
Features
Information
- Best Choice - #5 Best Countersink Bit For Metal
- Checked on 13/08/2024
- Based on 57 Reviews
IRWIN Countersink Drill Bit Set for Metal, 5-Piece (1877793)
Highlighted Features
- Precision Ground 82° Tip For Countersinking Most Machinable Metals, Wood, And
- Made From Industrial Grade High Speed Steel For Increased
- Includes A Black Oxide Finish For Added Corrosion
- Five-Flute Design Reduces Vibration For Smoother Drilling And Extended
Features
Information
- Best Choice - #6 Best Countersink Bit For Metal
- Checked on 13/08/2024
- Based on 69 Reviews
Countersink Drill Bit Set, 5 Pieces High Speed Steel 82 Degree 5 Flute 6mm Round Shank Mill Cutter Bit Countersink in Sizes 1/4” 3/8” 1/2” 5/8” 3/4” Set with Carrying Case.
Highlighted Features
- VERSATILITY – Comes in 5 most popular sizes bits 1/4, 3/8, 1/2, 5/8, 3/4 inch counter sink drill
- PRECISION - 82-degree tip drills countersink holes into most machinable metals, plywood, softwood, hardwood, fiberglass plastic, mild steel, don't work on
- COMPATIBILITY – 1/4” round shank fits all handheld and stationary
- EFFICIENT- Five-flute design reduces vibration and removes chip better, provides smoother drilling experience and extended bit
- DURABILITY - Made from High-Speed Steel with golden oxide finish for corrosion
Features
Information
- Best Choice - #7 Best Countersink Bit For Metal
- Checked on 13/08/2024
- Based on 78 Reviews
OCGIG 4pcs Countersink Chamfer Tool HSS(4241) Deburring Tool Set Metal Wood Drill Bits
Highlighted Features
- Material: High Speed Steel HSS
- Shank type: round, Sizes: 2-5mm,5-10mm, 10-15 mm,
- Ideal for cutting through metal, wood and plastic (hardness <25
- 90° angle on the point for sharp and precise countersinking, used for workpiece circular aperture chamfering or cone
- This bits should use the bench drill , it is easy to shake and it will affect the chamfering effect if you use the hand
Features
Information
- Best Choice - #8 Best Countersink Bit For Metal
- Checked on 13/08/2024
- Based on 11 Reviews
Chiloskit 3 Flute 90 Degree HSS Chamfering Tool Bit Countersink Drill Bit for Metal Wood, Pack of 6pcs
Highlighted Features
- Set of 6 countersink drill bits with precision-ground 90-degree tips for drilling into wood, metals, rubber, plastic, and
- Material of Drill Bit:HSS 4241 , classic high speed steel and durability in drilling holes in plastic, aluminum, copper, stainless steel and many other types of sheet
- Used in hardness 25 ° below the workpiece, such as carbon steel, sheet iron, insulation board,3 Flute design: with 3 flutes and staggered cutting teeth, these 90 degree high speed
- Great for Sinking 90 Degree Holes into Wood and Metals Countersunk Screws and Fixings.Suitable for DIY, Home and General Building/Engineering
- Size : In the picture.Shank: round shank.We will promise that our products are 100% brand
Features
Information
- Best Choice - #9 Best Countersink Bit For Metal
- Checked on 13/08/2024
- Based on 91 Reviews
ORXPLUS Tools 5 Flute Metal Countersink Drill Bit, 90 Degree Quick Release Shank Fits for 1/8"-3/4"(3mm-19mm)
Highlighted Features
- Designed to clean internal pipe ends quickly and safely. Made of alloy steel, cutter to remove damaged metal and
- Applicable for use on hole from 3mm to 19mm in
- Features a 1/4" quick change Hex shank fits all handheld and stationary
- Multiple Application - Suitable for use including stainless steel, hardened steel, mild steel, copper, brass, plastic and many
Features
Information
- Best Choice - #10 Best Countersink Bit For Metal
- Checked on 13/08/2024
- Based on 35 Reviews
4X Chamfer Countersink Deburring Chamfering Drill Bit Crosshole Cutting Metal US
Information
- Category: Machining Drill Bits
- Price: 18 USD
BCM ( BX01300 ) 7pc HSS Countersink Drill Bit Set (3/4/5/6/7/8/10mm)
Information
- Category: Drill Bits
- Price: 12 USD
Lütticke Pkd Countersink of Levels Drill Bit Stepped Step-Cutter 1 3/32in
Information
- Category: Other Metalworking Supplies
- Price: 62 USD